Product Description
XY-P15W is a high power Bluetooth audio receiver module. Built-in amplifier enable it to connect to speakers directly, without extra amp board. It is an ideal and inexpensive way to DIY wireless Bluetooth speakers or improve your old speakers.
Parameters:
Model: XY-P15W
Material: Semiconductor+RF-4+Acrylic
Work Voltage: DC 8V-24V(Module will be damaged if input voltage is over 26V.)
Communication distance: 15meter(Max)
Channel: Dual channel
Work Temperature: -40℃~85℃
Work Humidity: 0%~95%RH
Module Size: 50*35*14mm
Output Power Test(at 1KHz):
Output power 16W*2 @ 12V 4ohm
Output power 10W*2 @ 12V 8ohm
Output power 15W*2 @ 16V 8ohm
Output power 20W*2 @ 20V 8ohm
Output power 30W*2 @ 24V 8ohm (Better to install an extra heat sink)
Applicable speaker (30W~150W):
4ohm at 8V~12V
8ohm at 8V~24V
16ohm at 8V~24V
Note:
The amplifier board should be as far away as possible from the WIFI signal (router) to avoid signal interference. Also please don’t use too long speaker wires for the same reason.
Module will be damaged if input voltage is over 26V. Input voltage don’t be over 12V with 4ohm speaker and don’t be over 24V with 8ohm speaker.
It is recommended to use a power supply of 2A or higher.
It is recommended to use a speaker over 30W to prevent the speakers from overheating. Please add an extra heat sink if your speakers are overheated.
Please tear off the protective film from the acrylic boards before using.
Welcome to contact us if you have any question.
Package:
XY-P15W Stereo Bluetooth amp board x 1
Acrylic shell x 2
Copper column x 2
Screws x8
Product Features
- DIY BLUETOOTH SPEAKER – Just need a battery/power and two speakers then you will get a nice Bluetooth speaker. It serves as a nice way to have music at home or somewhere without having to dock the phone or plug it in. Say goodbye to those messy wires.
- BLUETOOTH 5.0 – Bluetooth version 5.0 is compatible with most devices and phones on the market. You are free to control the module in 15 meters range.
- HIGH POWER AMPLIFIRER – This stereo audio amp module works with DC 8V-24V and 4-16 ohm 30W-150W speakers. The sound was excellent and you won’t hear any crackles or electrical noise.
- SAFE TO USE – The Bluetooth receiver board supports reverse protection, short circuit protection and overheat protection. High-quality components and pcb board make your homemade Bluetooth speakers stand the test of time.
- EASY TO CONTROL&ADJUST – There is a single control knob that pauses the music and adjusts the volume. Connecting was simple. Just connect the Bluetooth named “XY-P15W” then you can play the music. It will automatically reconnect after power cycling the unit.
