Product Description

OVERVIEW:

This cooling system has two high-quality, low-noise 80mm fans, with long-lasting and quiet Fluid Dynamic bearings.

Also includes a 12 volt trigger control module, which turns the fan on and off, under the control of your receiver’s 12v trigger socket. The module detects the 12v signal, then sends the power from the cooling sysem’s transformer to the fans.

The fans have a specially-constructed 4-3/4″ square raised air-chamber base that covers twice the area of a standard fan, while also sealing air and preventing vibrations. Each fan is 1-1/2″ tall and only requires 3/8″ of space above for air flow.

The system has a power transformer, which plugs into an AC outlet. You can set this power unit to any one of 5 different speeds.

THE COOLING SYSTEM INCLUDES: 1 x dual-80mm (two fans) component fan unit, 1 x 12 volt trigger module, 1 x multi-speed power transformer, and printed installation instructions. All cooling system parts connect with special heavy-duty Molex plugs, which allows the parts to be separated for easy wire-routing.

SETUP: The system comes completely assembled, with all components installed and ready to go! Just plug the power transformer into an AC outlet, insert the 12 volt trigger plug into your receiver’s 12v socket, and drop the fans on top of your receiver’s top air vents.

GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — contact me (through Amazon) and I will send you a prepaid shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.

WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.

Product Features

• These two high-quality, super low noise 80mm fan units are designed sit on your component’s top air vents. Each fan has a special raised air-chamber base, which covers nearly twice the area of a standard fan. A vortex of air is pulled out of the top of your component over the full area of these raised bases.
• In addition, you control the speed of the fans, with the multi-speed power controller.
• The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the cooling system’s multi-speed transformer, directing it to the fans when it detects a 12v signal.
• IMPORTANT: Some receivers have a non-standard setup, where the receiver doesn’t directly control the trigger (for example, the trigger might be under the control of Zones 2 or 3, etc.). Please consult your receiver’s manual for details about how its 12v trigger operates, or contact me if you have questions.
• Recommended fan speeds for this system: The two fans (running together) are rated at 13db while moving 31 cubic feet of air per minute at 1/2 speed, or 16db & 41CFM at 2/3 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 1/4 speed = 10db/16CFM, 3/4 speed = 19db/46CFM, full speed = 22db/62CFM.