Product Description

This high-power stereo Bluetooth audio module designed with dual channels audio signal output. Built-in amplifier module therefore it can connect to loudspeaker directly. It is ideal for DIY wireless Bluetooth speakers and transponders. Parameters:
1.Module Size: 55*38*14mm
2.Remote controller: 86*40*7mm
3.Work Voltage: DC 5V-24V
1.Communication Distance: 15meter(Max)
2.Channel: Dual channel
3.Output Power(at 1KHz):
Output power 20W*2 at 12V 4ohm
Output power 30W*2 at 16V 4ohm
Output power 30W*2 at 21V 8ohm
Output power 40W*2 at 24V 8ohm
4.Match speaker(40W~200W):
4ohm at 5V~16V
8ohm at 5V~24V
5.Work Temperature: -40℃~85℃
6.Work Humidity: 0%~95%RH

Package Included:
1 x Stereo Bluetooth Power Amplifier Module
1 x Remote Control
2 x Acrylic Shell
4 x Copper Column
8 x Screw

Using Steps:
1.Choose the right speaker and connect as shown in wiring diagram.
2.Connect to right power supply from input terminal. LED indicator will flashing and it means that module enters pairing mode. And then speak prompt voice and it means that module is waiting for pairing.
3.Turn ON Bluetooth in phone.
4.Select Bluetooth device ‘XY-P40W’ in your Bluetooth device listing.
5.LED indicator will keep ON and it means that module is successfully connected and is waiting for playing.
6.Module will playing music after select music in phone. LED indicator will keep slowly blinking.
7.Increase volume by turn right potentiometer.
8.Decrease volume by turn left potentiometer.
9.Press potentiometer to play or pause music.
10.Press remote control also can control module.
11.Module will speak prompt voice if disconnected.

Product Features

• 【Comes with Remote Control】: You can control the module with the knob and you can also use the remote control to control the module.
• 【Amplifier board】: Wi th amplifier board, user can directly connect this bluetooth speaker board with wireless Bluetooth 3.0/4.0/4.1, or choose the headphone (Line in) way. And it’s compatible with multiple kinds of speakerss. This bluetooth audio amplifier board wide input voltage range is DC 5V-24V, output power is 20Wx2, 30Wx2, 40Wx2.
• 【Powering Methods】: the digital amplifier module is equipped with wiring blocks and DC 2.1mm socket which is compatible with most laptop’s power port.
• 【Protective Function】: the BT Amp is designed with acrylic protective shell, reverse connection protection, over-voltage protection, under-voltage protection, over-heat protection, short-circuit protection. Self-recovery overheat protection.
• 【No POP Sound】: there is no POP sound when powering this module, skipping song or pausing. Wide applicated for Modified speaker, Amplifier equipment, Car Bluetooth device.