Product Description
Standard Specification
contrast: 1000:1+-200
Weight (include the battery) : <26g
Frequency: 96/120/144 HZ
Transmission: 38%+-2
Working current: <1.8ma
Response time: 2ms+-0.5ms
Work Time: 50+-5 hours
View angle: 30（L/R 15）
Work temperature: 0~50℃ SYNC
SYNC operation: DLP-Link
Storage temperature: -10~60℃
Work humidity: 20%~80%
Power supply: 3.7V 85MAH
Atmospheric pressure: 86kpa~106kpa
Operation instruction
Turn on: Press the button about 1 second.then green-led flash one time, means-that turn on the shutter glasses
Turn off: Press the button about 3 seconds ,Then green-led fla_sh three time, means that turn off the shutter glasses
L/R Switch:
When turn on the shutter glasses, press thebutton shortly, you can switch the L/R sequence
Battery life check :
Press the button about 1 second, then red-led flashing several times ,means that glasses need to be charged
Stand by:
5 seconds no signal will come into standby mode. Green LED light flashes one time in every 5 seconds.
3D Viewing Guidelines
▪ When watching 3D Images under a fluorescent lamp (50Hz-60Hz) or a 3 wavelength lamp, you may notice a small amount of screen flickering. If so, dim the light or turn the lamp off
▪ If you change the channel disconnected due to either a change in the viewing angle or distance, the 3D glasses turn off automatically after 60 seconds
▪ If the projector Emitter becomes disconnected due to either a change in the viewing angle or distance, the 3D glasses turn off automatically after 60 seconds
▪The 3D active glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or projector
▪Be sure to stay within the viewing angle and optimum Sprojector viewing distance when watching 3D pictures
▪Otherwise, you may not be able to en」oyproper 3D effects .
Product Features
- Next Generation Super Fast 144Hz Refresh Rate (Backwards Compatible to slower 120Hz or 96Hz), Adopt the newest active shutter technology, high definition and no flickering or crosstalk.
- 5 seconds no signal will come into standby mode. Automatic Power Off Function within 1 minute of turning off your projector or no signal !
- Micro USB rechargeable 3.7V Lithium Battery, Charge time 2.5 hours, standby time 180 days, Continuous working 50 hours.
- Low-energy alarm function,Smart synchronization of working frequency.
- No Emitter required ! Support all DLP-LINK 3D projectors such as: Bovis / Optoma/ BenQ/ Viewsonic/ Acer/ Dell/Vivitek / Sharp/ LG/ NEC / Mitsubishi / 3M / ASK / Proxima / Casio / Digital Projection / EIKI / HD Projector World / InFocus / Optima / ProjectionDesign / Ricoh / Runco / Samsung / Smart Technologies / Specktron …
